A brushed stainless appearance has captured New Zealanders’ attention and has replaced chrome as the go-to bathroom fixture finish. This mixer combines that finish with repeating circular shapes creating a popular mixer that’s suitable for all pressures above 35kPa.
This is a brass shower mixer with a brushed finish and matching metal handle incorporating a quality 40mm European ceramic cartridge. It has a wider mixing action (which makes it easier to control the mix) and includes flow control as well as an anti-scald device.
1/2″ BSP male inlets and outlets. Isolators also included. Slim and stylish, solid 4mm metal faceplate 95mm in diameter.
Here’s a simple tip of how to set the mixer for better control over the mixing temperature on unequal pressure: With the faceplate off, set the handle to 6 o’clock. Turn both isolators off. Turn the hot isolator on full, then gradually open up the cold isolator until the water runs luke warm. That’s all there is to it!
To keep the finish looking good for longer, avoid spray cleaners, clean regularly with mild detergent on a soft cloth, rinse and wipe dry.
If you prefer a shorter pin on the handle, a 40mm pin can be requested at the same time as ordering the mixer, for a small additional cost. The code is OPTION CC 40 PIN BS.
Also available in Brushed Gold PVD, Gun Metal PVD, Chrome and Matte Black electroplating.
